360 Mini Vise
360 Mini Vise
Published 2018-01-17T16:08:10+00:00
360 Mini Vise - Tips welcomed
Original 3d Printable Design by A.D.Wheeler @ https://TheExplorographer.com
A lightweight vise for holding wires, electronics, small models. Can be printed in PLA, PETG, ABS, etc. The strength of the vise is dependent on your settings and printing material. I printed my test models in PLA and it is plenty strong enough with the settings below to handle most items. Jaws are slotted for holding electronics at 4 different angles in conjunction with the jaws.
This model will adapt to PanoVise Products. Specifically these Hobby Creek helping hands: http://amzn.to/2FJX6JU
You may not redistribute, or redesign this model without permission.
Questions about the model? Contact me @ info@theexplorographer.com
Happy Printing! ~AD
All parts are pre-oriented for printing without supports. Use at least a .15 layer height so the vise screw works properly. And 7 bottom/top layers and 4 perimeter shell layers, and an infill of at least 20% for strength. I suggest printing with a brim for proper build plate adhesion when printing the tall parts. This model is 100% tested for quality printing and functionality.
发表的日期 | 17/01/2018 |
让时间去下载 | 13 - 25 分钟 |
材料数量 | 145.86 g |
尺寸大小 | 220x220x160 |
支持自定义 | YES |