3D printer case with Lack tables (Ikea)
3D printer case with Lack tables (Ikea)
3D
Published 2017-08-01T18:07:55+00:00
Here is parts to build a 3D printer case with Lack tables from Ikea.
Edit: To regulate temperature within the case, you can use two 12V fan and a w1209 for example, that's what i will do. Here is a w1209 case i made too.
*************************
All parts you need:
- 2 or 3 Lack table from Ikea
- 4 x acrylic glass (plexiglass) 4mm (0.157") thin 50cm x 44.5cm (19.68" x 17.52")
- Wood screws and hex screws
Printed parts (BOM):
- 1 x Left front Link
- 1 x Right front Link
- 2 x Back links
- 2 x Top Back Links
- 1 x Top Left Front Link
- 1 x Top Right Front Link
- 2 x Hinge
- 1 x Door knob
If you want to connect 3 tables together, you need 4 x L Shape more.
Optionnally, if you want feets for the table on the ground, you can print 4 x Feet.
*************************
Note: The L_shape.stl is to join the first table from floor and the second together. Rods of plastic are here to center the L without mesuring, cut them when you found their good place :)
There is no need of supports for all parts exept the door knob.
Infill of 30% is good as parts need strengh exept the door knob that can have a 10% infill.
For the hinge, print them upside down to avoid supports !
| 发表的日期 | 01/08/2017 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |