AA/AAA Battery Dispensers
- 家居产品>
- 可回收 |
- 家居产品>
- 起居室>
- Storage and boxes
AA/AAA Battery Dispensers
3D
Published 2017-11-20T10:14:47+00:00
Kudos to the original from jgillick (https://www.thingiverse.com/thing:615934) and Blackbird7171 for his remix and to RaMcHip for his remix that reduced the plastic and added lids (https://www.thingiverse.com/thing:469115). I just added labels to the front of the base dispenser. Have printed the AA and the tolerances are absolutely perfect.
AA dispenser with extension holds 18 batteries with lid on. With an extra extension it holds upwards of 24/25.
Print as many extensions as you need to fit more batteries!
EDIT 11/17
Deepened the labels and provided a wedge beneath the "A" overhangs so they print better. Also added all individual models and battery size plates (AA/AAA).
EDIT 12/16
While printing another copy of the AA plate, I noticed the labels were a little too deep and the back wall wasn't printing as cleanly as it should. I've replaced all models that have labels so they're not quite as deep which solved the issue.
Happy printing!
The prints you see were done using Hatchbox PLA at .2mm layer height with 10% infill.
No support needed.
| 发表的日期 | 20/11/2017 |
| 支持自定义 | YES |
Great design! Thanks