Loading
Albus Dumbledore Bust
3D
Published 2015-06-19T14:19:37+00:00
Albus Dumbledore Bust
3D
Published 2015-06-19T14:19:37+00:00
Professor Albus Percival Wulfric Brian Dumbledore is a fictional character in J. K. Rowling's Harry Potter series. For most of the series, he is the headmaster of the wizarding school Hogwarts. As part of his backstory, it is revealed that he is the founder and leader of the Order of the Phoenix, an organisation dedicated to fighting Lord Voldemort.
Dumbledore is portrayed by Richard Harris in the film adaptations of Harry Potter and the Philosopher's Stone and Harry Potter and the Chamber of Secrets. After Harris' death, Michael Gambon portrayed Dumbledore for all of the remaining films.
Print with 0.2 mm layer height and 10% infill
| 发表的日期 | 19/06/2015 |
| 尺寸大小 | 66.64 mm x 77.95 mm x 120 mm |
| 复杂程度 | 容易 |
| 支持自定义 | YES |
Share 3D Post on Facebook
Printed on Sindoh 3DWox at 50 microns, 46 hour print time, 15% infill.
Printed at a 20% infill @ 0.1 mm layer height with no support. Great Model! Printed several. They make great gifts for people who are potterheads such as myself.
Printed around 200% larger with 10% infill, 0.1 layer height and no supports . Base was removed after printing to fit on surface where it is to be displayed. Needed to be patched after printing. Thinking this was due to the scale increase and should print perfect at the base scale. Light sanding followed by primer and passes of a Stainless Steel and metallic gold spray paint. Details were painted with a dry brush pass with a brass rub n buff and finished with a black acrylic wash.
10% infill 3.0 resolution
Printed by 86Duino Enjoy.
Printed in 3DE Premium Snow White Ceramic and smoothed with IPA
Printed on a Tevo Little Monster using the following parameters: Material: ABS Nozzle size: 0.4 Layer heigh: 0.2 Infill: 10% Supports: NO Nozzle temperature: 230°C Bed temperature: 90°C Cooling: Off Speed: 60mm/s
This was an awesome print. I used a Copper Metal filament to print this amazing Dumbledore. Your design was fantastic. Please make more Harry Potter characters haha.
Awesome design! Printed at 200% scale (took about 24 hours to complete). Here's a video of the printing process: http://youtu.be/0AXZDMDRedg
Silver ran out through the print :(
scale the model to 80mm. layer height 0.08 mm. PLA bronze colour at 190degree speed 60 mm/s, travel speed 100 mm/s ,retract distance 5 mm. , retract speed 50 mm/s www.bb-ocean.com
We printed these on the Library's PolyPrinter 229.
My second ever print using my Creality Ender 3 and it came out amazing. I got Ziro marble PLA specifically for this bust and I'm very glad I did. Its a great model and was very easy to print using Cura's stock profile (for the CR10 but with a smaller bed since I had the Ender 3) Thanks so much for uploading this!
Print on FLSUN QQ with 3deksperten Filament PLA Copper Silky
Great model! Printed in Gray eSun PLA+
Bronze PLA. Great model, thank you.
My second print ever. I'd say it came out really good. Thanks for the model, my daughter loves it.
10% in fil 0,1 très réaliste :)
Wonderful sculpt. you've really captured Richard Harris!
Nozzle 0.4, layer height 0.1.
Printed 0.16 layer 10%infill 4walls took 10hrs
Scaled to 166%, Printed @ 0.16mm on Colido3d Grey. Base custom infill at 50% with remaining at only 5%, using 1.76mm walls (32 hours 40 mins). Airbrushed
Great design! I printed him a few months ago in grey PLA and finally decided to paint him recently. Turned out pretty cool.
Great model! Printed on Ender 3 in PLA Gembird gold filament. (0,1 layer height)
Printed at 0.12mm in Gizmo Dorks marble PLA. It's a great likeness and it printed quite well. I made use of Cura's tree supports which made for good support of the nose and a couple other parts, without leaving anything to clean up.
Très bon print. Merci. Fait en 30cm de haut.
Ender 3 Sunlu gray PLA. 0.2 Layer Height.
Incredible model, thank you! (Blue was printed on Creality Ender 3, purple was on the TEVO Tarantula)
Printed using my new resin printer BEAM PRISM BEAM GRAY RESIN
Really nice model. Easy to print without support. GEEETECH PLA Wood 50C Bed 200C Nozzle 60mm/s Speed
100% Ender 3 - 0.2mm - 10% Infill - 6 top/bottom layers 9hours 30min PLA EasyFill 3DFila
"Happiness can be found, even in the darkest of times, if one only remembers to turn on the light. " Albus Dumbledore Follow on instagram. @tekno.lab
This one is for all of the Harry Potter Fanatics, it's pretty much perfect! Thanks so much for the print. I even done a timelapse for it - http://youtu.be/gQaNqfleVOk
Really nice and detailed print.
Wonderful model. I needed a gift for a friend. He's a huge Harry Potter fan. I did resize the model considerably...image with glue stick to show size increase. I also removed the base. At this size, it wasn't needed. Printed with CC3D Silk PLA in Antique Gold.
layer 0.1, infill 15%, no supports... that is one mighty fine project! ;)
0,12mm layer height %16 infill 150mm height
Scaled to 75%, 90 mm high, approx. 30g prusament galaxy silver, 0.15 mm layer height, 5% infill, printing time 4h 21min. Everything worked fine, great model!
0.1 layer height, %20 infill
10% infill, no supports. Standard Quality (0.2mm). Printed white, then spray painted with Rust-oleum Metallic Finish Bright Coat Copper.
Ender3 - 0.2mm - 150% - Winkle PLA black - painted with Gold Wax
0.12 layer height infill combination ~4hr print time primed with army painter, dry brushed with Revell tank grey + bronze
Albus Dumbledore Bust printed on Dimension Delta 3D Printer. INVENTIVE 3D - "GIVING 3RD DIMENSION TO YOUR DREAMS" CONTACT US AT: Mr Mohit Sakhpara : +91 8866101225 Mr Jeval Dholakiya: +91 8000136060 Email ID: inventive3d@gmail.com Facebook: www.facebook.com/inventive3d Twitter: @3dinventive