Atari 2600 - 2nd Gen Amazon Dot Holder
Atari 2600 - 2nd Gen Amazon Dot Holder
3D
Published 2019-03-02T15:15:09+00:00
This is a mount/holder for the Amazon Dot 2nd gen.
I modeled this after an Atari 2600 controller from a picture. All the elements are there but I don't know if this faithfully matches the dimesions of the original Atari 2600 controller.
The Joystick.stl is held in by either Temporary Ring.stl or Permanent Ring.stl and allows it to be used to press any of the four buttons on the Echo.
There are 2 designs.
The "Permanent" assumes you will be gluing your Echo into the holder and gluing the Permanent Ring.stl to the top of your Echo.
The "Temporary" adjusts the model to have a brace to hold the Echo and Joystick.stl in place.
NO microphones are blocked and the speaker actually has an "amplification" chamber that work fairly well!
p.s. now that i've printed it I will be modifying the ring and joystick so that the joystick can't spin and misalign with the buttons.
As usual, my models print best as oriented in the file.* Tolerances work on my machines but you may need to bump the scale +/-1% on your machine to get parts to fit correctly.
Require support:
Joystick.stl (Does not require support if you print upside down, I will be uploading a fixed file)
Removable Ring.stl
Optional support(if you have bad bridging):
Removeable Body.stl (only for the cable port hole)
Permanent Body.stl (only for the cable port hole)
No support:
Permanent Ring.stl
Button.stl
| 发表的日期 | 02/03/2019 |