Scaled to 80%

Printed with Super Helper SH105 from Winbo, with Winbo Brown PLA 60 microns resolution

Absolutely love this little guy! Amazing job and thanks for the opportunity to print this!

baby groot airbrushed

My baby Groot~

Really great model, super cute and not to hard to print.

printed on Wanhao DLP Duplicator 7 resolution of 80micron

Printed on Ultimaker 3 .06 Layer Height 30% Infill Sanded and Painted

Hatchbox Wood PLA, .1 layer height

Printed Groot with glow in the Dark PLA, the model works good, very good detail of Groot and I didn't have to use any supports or rafts printed it at %20 infill.

Print by T3D mobile 3D printer that can directly prints from the light of your mobile devices. Take a look: http://myt3d.com/

Filamentive rPLA @0.05mm layer height 10% infill. yes it does mean a 32 hour print but worth it for the detail and minimal post processing

Beautiful design, I created this video to go along with it https://youtu.be/un7RkNceMgY

0.12 layer . 30mm/s print speed.MS hot end.Pure Perfection.

pla 15 infill 55 hotbed risoluzone 0,20

Thank You for fantastic model

Shrunk him a bit for the first print. Printed in PLA with no supports on a Creality Ender 2. He was gone less that 24 hours later as my nephew claimed him

I found the best use for my wood based PLA. no just need to print the other version and paint them a bit. Great design

Byambaa's Groot. Painted with acrylics via brush and airbrush.

My Father really wanted one. Since it's supposed to sit on his desk at work, I didn't sand it before painting and I didn't put THAT much effort into paint-job (since it's could be damaged easier in the office. Doesn't mean I didn't put any effort, I did, but it could've been done better). Acrylics. 0.2, infill 30%

Nice

0,2 15 hours

Amolen Wood PLA, no supports

Awesome!!! Great model!

Always a fun print and paint!

.15mm @210°c with eSUN pla. Time:23hrs approx.(With supports)

Great model thanks

Love this model! Thank you very much! I would love to have a go at painting it but I’d probably ruin it as I’m not the artsy type! EDIT: Had a go, turned out lovely!

Gold PLA BY Esun. Printed at 100%,40%,and 25% scale with no supports. Super easy and super cute print.

Awesome model! Printed at 60% size, 0.15mm resolution. First print to paint, i'm happy.

Turned out amazing, thanks!

Printed mine already a while ago. Just remixed it with a lighted brain. So on long drives with a nightliner it's on the dashboard. And when i go asleep i switch the light/brain on. ;-) dreamtime...Underneath the piece of "green" is a 3D printed box with batteries and a switch.

Stringy filament. Lowered temperature to 190°C at the head

how about a 15% size print? YAS!!

Just finished Baby Groot in time for Christmas for a present

Gerade baby groot fertig gestellt,..

First attempt. Very great model, to print and paint easy. Thanks to Byambaa Erdene

First Attempt, Plawood. very nice model

Left Groot printed at 25% scale with 0.12mm layers. Took around 1.5-2 hours to print. Right Groot printed at 75mm height at 0.12mm layers, took around 5-6 hours to print.

This is my baby Groot, print at 0.2 in white PLA and my first time when i paint some figures :D

Amazing model, thanks. Also my first time painting

Nice model.

i made few with different sizes, its nice and fun object :)

my first print on 3d this is my groot wood PLA on ender 5 plus

Le modèle est parfait. Merci beaucoup J'ai ajouté des éléments de décor pour mettre en valeur Bébé Groot (Trouvable sur le site)

Thanks for sharing

my first ever print with wood pla and it worked pretty good. it is .12mm layer and it didn't turn out as good as i was hoping but i dont know if its the filament or something im doing wrong

Belle impression

Well done

suoer modèle vraiment réussi

Great model!!

Filament Francofil Café Temp 210 Bed 50

This model is so good. So detail.

I am groot

Printed with a Voxelab Proxima

First print ever! Printed on Elegoo Saturn with Elegoo Standard Grey resin.

Hand-painted with Army Painter acrylics || Printed on Elegoo Mars 2 Pro with Elegoo Water-washable resin (grey) || For my father.

Awesome!

I am Groot

My first painted model!

Great model

Phrozen Transform at 0.05 mm Layer Height

Great looking design, I absolutely love this print!

My first test print and it looked great

Lots of fun to paint. Thanks for uploading!

50 mm Anycubic Photon