Bowden Extruder Idler/Arm
Bowden Extruder Idler/Arm
Published 2017-02-20T12:50:17+00:00
While building my printer (Anycubic K1 - Kossel Mini) I accidentally broke the arm/idler of the extruder. This was my first ever functional design and printing a replacement like this was of course quite a hack-job. As this model is rather small but still somewhat complicated it is great as a test-print for new settings (as you can see in one of the pictures).
Bearing: 608ZZ
Prints as-is without any support structures.
It is a direct replacement for the idler this printer shipped with and the model is as close to the original one as possible. It is always good to have a replacement part at hand, so you better print this before it fails! (Safes you from many headaches :D )
发表的日期 | 20/02/2017 |
让时间去下载 | 8 - 10 分钟 |
材料数量 | roughly 3 grams |
尺寸大小 | 45mm x 12mm x 11mm (XYZ) |
打印工艺 | FDM |
支持自定义 | YES |