Brigitte shield with leds.
Brigitte shield with leds.
3D
Published 2018-04-06T15:06:46+00:00
Thats a rework from Printed Obsession to add lights on the shield. You only need to reprint the shield, since all the electronic is in there, the connection to the arm remains the same of the original design, so you can reprint only the shield and atach it.
I used this battery holder
https://solarbotics.com/product/bhold2032/
Its importants for the dimensions, the shield fits exactly with this one. (its a common battery holder so you can get it everywhere)
used 2 standard leds welded in the back of the battery holder with a tiny switch to switch on/off then cover it all with the shieldconector.stl printed in transparent pla to let the light go trough.
Add a transparent PETG sheet inside of the shield ( cut it and use a heat gun for better results) to get better light difusion
| 发表的日期 | 06/04/2018 |