ChainClip Construction Set
ChainClip Construction Set
Published 2017-08-23T14:11:04+00:00
Hi!
This is another kind of construction-or-something set.
You can build bracelets, geometric patterns in 2D or 3D, and even robots, ships, some animals or everything you can imagine.
Results are some kind of mechanic-chained articullated objects.
Triying to design an easy to print joint for articullated figures printed in PLA, it evolved into a set of parts that you can combine and make lots of figures and forms.
Eventually i'll design more parts, props, etc.. but this is the basic set.
Feel free to print, redesign or design new parts and send your makes.
Have fun!
EDIT: uploaded 123Design file used for this project. The file previusly submitted was only for extra parts
Printer : BQ Prusa i3 Hephestos
Rafts : Doesn't Matter
Supports : Doesn't Matter
Resolution : 0.2 or less
Infill : 50% or more
Notes : Tested with PLA.
Resolution of 0.2 it's ok
Infill of 50% or more recomended.
Scales:
Tested at 100%,70% and 50% at 0.2 resolution and prints perfectly.
For smaller scales use a resolution of 0.1
发表的日期 | 23/08/2017 |
打印工艺 | FDM |
复杂程度 | 容易 |