Curve for Garden Railway Track System (32mm)
Curve for Garden Railway Track System (32mm)
3D
Published 2017-05-15T18:07:27+00:00
360 mm radius curve track for 32mm gauge tracks (SM32) common used in Garden railways (16mm and 7/8th scale).
There are track holders for printed sleepers och wooden sleepers.
The STL files is for a complete track, track you assemble by your self and a complete track for dual extruder printers.
This Track has a very tight curved radius, so it will probably only work with short Locos and Wagons.
It is easy to print these track, you only need support on the complete track and dual version.
You need to print 14 tracks for a half circle.
Dual extruder tracks aren't test printed yet, but seems Ok in Cura.
All STL files has been tested in Netfabb.
Files named with "Dual" STL are for dual extruder print.
A Template for easy assembly is included.
I have printed this track with PLA at 0.3mm layer height and 30% infill .
| 发表的日期 | 15/05/2017 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |