CYBORC
$3.99 CYBORC
Published 2019-08-16T12:32:19+00:00
You can also buy my models at:
https://www.artstation.com/vladoturek/store
https://www.cgtrader.com/vladoturek
https://cults3d.com/en/users/evilminiatures/creations
Everybody likes orcs ....... hope. So here's one little bit different cyborg-orc for you. This bust is designed mainly for DLP / SLA printers.
The height of the body including the weapon is 77 mm. Total height including base is 10.2 mm.
You can use a solid model or hollow model. If you change the scale, I recommend to use a solid model and make it hollow in the Meshmixer and add support in your favorite slicer software.
Enjoy this guy ;-)
Thanks
A sample print was made on my Anycubic Photon. I used Ameralabs AMD3 resin (https://ameralabs.com/) with these print parameters:
5 bottom layers
70 bottom exposure time (s)
0.03 layer thickness (mm)
4.4 normal exposure time (s)
1 Off time (s)
发表的日期 | 16/08/2019 |
Price | $3.99 |
尺寸大小 | 50mmx80mmx100mm |
打印工艺 | DLP/SLA |