Detail Your Own Single Print Treasure Chest - Version 2
- 游戏和玩具>
- 汽车 |
- 家居产品>
- 起居室>
- Storage and boxes
5,190
views
183
downloads
2
collections
0 comments
Loading comments... 
Detail Your Own Single Print Treasure Chest - Version 2
3D
Published 2015-08-06T15:51:24+00:00
20
0
Add to Collection
Description
This is an update to Detail Your Own Single Print Treasure Chest (https://www.myminifactory.com/object/11091). There has been some issues with the joints fusing together so much that the walls will not move. I have increased the tolerance between the joints and the fusing issue should be gone.
Just as before the treasure chest is oriented to be printed on the inside so any details can be added without support getting in the way. The chest can be detailed easily in either zbrush or mesh mixer.
After printing gently move the walls till they are vertical. This requires a little force and patience.
Printing Details
Print in pla with 10% infill. Can print with no support or raft.
Technical Information
| 发表的日期 | 06/08/2015 |
| 让时间去下载 | 228 - 分钟 |
| 材料数量 | 51 |
| 尺寸大小 | 140mmx146.3mmx13.45mm |
| 打印工艺 | FDM |
| 复杂程度 | 中级 |
| 支持自定义 | YES |
More Information
Object Parts
