Dodecagon Vase
Dodecagon Vase
3D
Published 2019-02-12T02:34:58+00:00
You might also like these free designs!
* Folio Vase: https://www.myminifactory.com/object/3d-print-84927
* Zephyr Vase: https://www.myminifactory.com/object/3d-print-81577
* Cog Bowl: https://www.myminifactory.com/object/3d-print-75430
* Groover Vase: https://www.myminifactory.com/object/3d-print-75113
* Classical Vase: https://www.myminifactory.com/object/3d-print-81753
* Lattice Bowl: https://www.myminifactory.com/object/3d-print-53755
* Blade Vase: https://www.myminifactory.com/object/3d-print-78571
* Gothic Goblet: https://www.myminifactory.com/object/3d-print-73249
* Fan Parabola Vase: https://www.myminifactory.com/object/3d-print-73432
* Clover Vase: https://www.myminifactory.com/object/3d-print-71567
* Chunky Ring Vase: https://www.myminifactory.com/object/3d-print-77170
* Tendril Vase: https://www.myminifactory.com/object/3d-print-51873
* Jigsaw Vase: https://www.myminifactory.com/object/3d-print-50426
* Lace-up Tiled Vase: https://www.myminifactory.com/object/3d-print-45183
* Paintpot Planter: https://www.myminifactory.com/object/3d-print-40901
* Rustic Star Vase: https://www.myminifactory.com/object/3d-print-73918
* Quadratic Vase: https://www.myminifactory.com/object/3d-print-73047
* Pumpkin Jigsaw Vase: https://www.myminifactory.com/object/3d-print-72744
* Pinstriped Table Vase: https://www.myminifactory.com/object/3d-print-71432
And this premium design:
* Relic Vase: https://www.myminifactory.com/object/3d-print-79349
If you're wondering why I like vases so much, check out this video!
(don't forget to subscribe!)
* Vase Mode is Great!: https://youtu.be/tba6KHk4qRk
Testing out new filaments is a great excuse to design yet another vase! I really love vase prints as a means of experimenting with shape and structure, and for this one I started with a dodecagon and worked from there. At one stage it had twists and knurls, but by the time I was happy we were back at a much simpler, vertically-faceted design.
This is a vase mode print, so you'll want to enable that in your slicer! In Cura, it's called Spiralize Outer Contour, under Special Modes.
| 发表的日期 | 12/02/2019 |
| 支持自定义 | YES |
