Ebony and Ivory
Ebony and Ivory
3D
Published 2018-02-26T15:58:35+00:00
Dantes iconic pistols from DmC: Devil may Cry.
This is fanart inspired by DmC: Devil may Cry. If you don't know the game, I highly recommend playing it!
Downloads contain the split up pistol parts as I printed them. I'm currently working on an unsplit version and on a split version with guides for easier lining up of the parts when assembling.
Print for private/noncommercial use only. Credit me when publishing material containing this model. Uploading pictures of your makes is much appreciated.
Photos (the good ones) were taken by @feline.pure and @sinystra.
Print with a material with low warp, since the model has large flat bottom surfaces. Mine were printed in ABS and you can see what happens in the unpainted picture. With less warp, the parts will fit much better.
Glue the printed parts together with a glue appropriate for your printing material. After glueing I recommend filling any gaps on the contacting edges with some appropriate putty/filler and sanding the excess material as well as the print lines down before spraying on a primer layer and a black layer (if the primer isn't black allready) and then painting as wanted and sealing with clear coat when finished. Of course everything should be left to dry after each step.
For more details on printing, glueing and finishing props, have a look at some tutorials on youtube (for example on the Punished Props Academy channel).
| 发表的日期 | 26/02/2018 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
Stampata e assemblata, oggetto molto imponente