Ender 3/CR-10 BMG Direct Drive
Ender 3/CR-10 BMG Direct Drive
Published 2019-09-17T18:28:15+00:00
Special thnks to the original creator Greg191134 of "The Tank" Bondtech BMG + E3D v6 Print Head https://www.thingiverse.com/thing:3080548
The original is a great model and will be perfect for most people. I wanted something i didn't have to take completely apart to unclog my v6 (clogs are my fault not the models, I use alot of cheap filament)
I used the .stp file from the original model (again thank you Greg191134 for including it) and redid the top to hold the clone bontech in place and be able to slip the v6 in and out with taking anything apart except to take off the front.
I attached the BLtouch mount to the back so it wouldn't have to come off to fix anything
I redid a hole in the front to go all the way through to screw in the carriage for more sturdy strength. (see pic for illustration)
The rest of the remix was simply to minimize the original to a smaller model.
I will be redoing some more on this to move the stepper to the front and to better arrange the wiring. I used a pancake stepper with this and it wont fit the stock stepper without turning the top around
Printed in PETG
(offsets from nozzle +32mm on X and -2mm on Y)
The design is fully compatible with the Prusa new 45° fan shroud
发表的日期 | 17/09/2019 |