Enlightened Sleeping Muse
Enlightened Sleeping Muse
3D
Published 2017-06-16T16:52:43+00:00 • Remixed from Sleeping Muse at The Metropolitan Museum of Art, New York
I remixed the beautiful Sleeping Muse (downloadable from Scan the World) into a unique lampshade for the office.
This lampshade works great with most standard light cord sets, like the ~$5 HEMMA cord set from IKEA (but it should work with any cord to be honest - I retrofitted it on a different cord set, the reference of which I ignore).
At the current scale, the object is 16cm high (6.3in) and the hole on the top is is just under 12mm wide. You can scale this up or down at wish.
This print will work without support (slight drooping at the top, but on the inside of the object, so no one will notice it).
Layer height at 0.25mm on the printed object looks great.
I added a raft when printing.
With those settings, print time was 17.5 hours on a Raise3D N2+, consumming <200g of plastic (white PLA in this case), so a beautiful and unique lampshade for under a fiver!
| 发表的日期 | 16/06/2017 |
| 让时间去下载 | - 1045 分钟 |
| 材料数量 | 187g |
| 尺寸大小 | 16cm high |
| 打印工艺 | FDM |
| 复杂程度 | 中级 |
| 支持自定义 | YES |
