gameshell case
gameshell case
3D
Published 2018-03-22T11:45:02+00:00
This is the case for the GameShell a Open Source Retro Gaming & STEM Portable Console. the gamehell is on kickstarter ( http://kck.st/2AYvJbW )
GameShell is the world's first modular, portable game console with a GNU/LINUX embedded operating system. It allows you to play thousands of classic games from Atari, GB, GBA, NES, SNES and many of history’s greatest consoles.
GameShell uses the powerful LINUX operating system and every game published on it will be free, open-source and modifiable. We have included two classic games - Cave Story and DOOM1 in GameShell and there will be more free games included in future.
this model was not made by me it was made by gameshell.
kickstarter link - http://kck.st/2AYvJbW
layer height: 0.2mm temp: 200 support and raft: yes shell: 3 filament: PLA
| 发表的日期 | 22/03/2018 |
| 让时间去下载 | 586 - 680 分钟 |
| 材料数量 | 134.63g |
| 尺寸大小 | 13.6cm x 9.6cm x 2.5cm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
New GameShell in LulzBot Green, just because. 1st draft at getting some new shells for the new GameShell platform made up. These are the older STL files that were released earlier in the year (thx for posting, r3g27) by the company, but the similarity and fit to the final release plastic molded shells are almost exact. 3D printed top fits the molded case bottom, vice versa. Some close ups of the 2 cases. Removed supports, but no other post production. A quick sand, or heat gun should smooth out the imperfections nicely. Very little modifications. Used 0.18 layers, 100% infill with Polymaker PLA. Used raft and supports, as you can't print flat to the bed, due to ridges on the outer surfaces. Not the easiest print with the amount of support you have to use. Will try for another higher quality print with nGen to put on the final customization touches.