Garden Railway Track System 32mm Gauge
Garden Railway Track System 32mm Gauge
3D
Published 2017-05-15T18:08:29+00:00
Straight and 762mm radius curve track for 32mm gauge tracks (SM32) common used in Garden railways (16mm and 7/8th scale).
The length off the tracks are made so they are printable on most 3D-printers.
There are track holders for printed sleepers och wooden sleepers.
There are STL files for complete track, track you assemble by your self and complete track for dual extruder printers.
Turnouts and other radius curve tracks are coming in the future.
It should be easy to print these tracks, you only need support on complete tracks.
You need to print 14 curved tracks for a half circle.
Dual extruder tracks aren't test printed yet, but seems Ok in Cura.
All STL files has been tested in Netfabb.
All "Dual" STL are for dual extruder print.
Templates are for easy assembly.
I have printed my tracks with PLA at 0.3mm layer height and 50% infill .
| 发表的日期 | 15/05/2017 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |