Hellboy Tooth Fairy
Hellboy Tooth Fairy
3D
Published 2018-03-13T10:51:12+00:00
A quick model of a tooth fairy (Carcharodon calcarea). I sliced it and ran a print to make sure it worked but never really finished it. Thought I'd put it up here and see if any of you talented people wanted to make a better job of it than I did.
Depending on how good your bed adhesion is you might need to put a brim on some of the taller pieces.
I've uploaded half the model, you'll need to run a mirror image to finish it off. I've included three heads with different expressions, and don't forget, you'll need four legs. The model can have some variety of pose, possibly more if you took a heat gun to it and flexed the bits once they're assembled.
I created the veins for the wings but you'll need to trim an appropriate leafy shape from paper to mount them to.
| 发表的日期 | 13/03/2018 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |
Принтер: Hercules; Пластик: ABS Сопло: 0,3 мм Слой: 0,15 мм