Hinged Spare Nozzle Case
Hinged Spare Nozzle Case
3D
Published 2017-08-21T10:56:35+00:00
I designed this case to hold my spare nozzles for my Prusa i3. The case is printed in one piece with functional hinge and clip to keep the case closed when not in use. Never mislay those nozzles again. This on has text 'Nozzles 0.4mm' let me know if you would prefer one that just says 'Nozzles' or blank and i will add additional versions.
*** UPDATED DESIGN TO REDUCE SUPPORTS AND IMPROVE QUALITY OF TOP ***
Nozzle_Case_0.4Text.stl = Updated case with 'Nozzles 0.4mm' embossed on top
Nozzle_Case_Nozzles_Text.stl = Updated case with 'Nozzles' embossed on top
Nozzle_Case_Blank_Top.stl = Updated case blank top
Printed on Prusa i3 Mk2 at 0.2 layer height with 10% infill. Some support is required for the top and hinge to print correctly.
| 发表的日期 | 21/08/2017 |
| 让时间去下载 | - 80 分钟 |
| 尺寸大小 | 50mm x 20mm x 20mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |