IKEA Lack-Table easy stackable design
IKEA Lack-Table easy stackable design
3D
Published 2018-08-28T17:16:17+00:00
This is just a simple design for those who wants to stack ikea lack-table on eachother. I wanted a design without screws or anything like that, so I did. The part maybe have to have support but if your printer can handle some longer bridging its not aquired. I printed without support and it turned out quite good, just some work after and its good.
You just put the part on the table abow and place the lack-table on anot
I hadn´t the money to make a plexiglass design with closed in printer so I started with this simple stackable-design which works great. I have thought on making a design with plexiglass and much other gadgets and smart solutions, so keep a eye out.
You will need four parts, two right pieces and two left pieces. The part isn´t so big so the most printers should be able to print it.
Print with the SIEL text downwards on the bed and start with a slow first-layer speed. If you want it o print a little bit faster you can print with 0.25 layer height also. I printed this part in PLA which works great but other material works just as good as PLA.
Remember to clean the bed with something to prevent warping, I use aceton.
| 发表的日期 | 28/08/2018 |
| 让时间去下载 | 190 - 220 分钟 |
| 材料数量 | 50 grams |
| 尺寸大小 | 92mm x 57mm x 57mm |