Jon Snow bust
Jon Snow bust
Published 2019-05-25T23:33:01+00:00
For an Exclusive Night's Watch edition of Jon, take a look at my Patreon :)
Jon Snow.
It is difficult to write much about this character without spoiling things for those who haven't yet seen the entire arc of Jon Snow, so I'm assuming if you are interested in printing him you already know enough :)
This was a fun sculpt, and surprisingly quick to get done. The likeness isn't 100%, but it's the best I could do without going entirely crazy!
This bust shouldn't require supports to print, and it is printed in two parts (I like doing this so if you have 2 printers you can print both parts simultaneously).
Printed this on my Original Prusa MK3 in 3DNet PLA.
The main, top part was printed using a 0.3mm nozzle and 0.12 layers, and the base using a 0.4mm nozzle, and 0.15mm layers.
If you scale the objects for printing, remember to scale both parts equally!
发表的日期 | 25/05/2019 |
支持自定义 | YES |
Printed on Ender 3. 50% scale 10% Infill 0.08mm 10 Hr 20 Min 28 Sec PLA Prata Machine 3DFila timelapse: youtu.be/H7kw8sihmJs