M416 Trailer in 1:10 Scale
M416 Trailer in 1:10 Scale
Published 2017-02-02T18:44:09+00:00
Support
If you would like to support future free releases, please feel free to leave a tip (especially if you sell prints of my designs). I really want to keep on giving these things away for free.
Making use of the affiliate links that I provide to purchase parts is also a way of supporting me that doesn't cost you anything. I don't recommend anything that I haven't personally used.
Failing all of that, I heartily appreciate a credit or link back to my facebook page when you post your prints on social media.
Introduction
This is a an almost 100% 3D printed trailer for your 1:10 scale 4x4, based closely on the M416 trailer (it goes perfectly behind my jeep).
It includes working leaf-spring suspension, which I recommend printing in PETG
Video
Parts
Besides the printed parts you will need:
- M2 nuts
- M2x5 screws
- M2x10 screws
- M3x40 screw
- M3 nut
- M5 threaded rod (~160mm)
For each wheel you will need:
- 1.9 Tyre (these go well with the Jeep)
- M2x10 Screws (5)
- M2 nuts (5)
Printer
All of the thin parts are designed in multiples of 0.4 for easy thin-wall printing with a 0.4mm nozzle.
发表的日期 | 02/02/2017 |
打印工艺 | FDM |
复杂程度 | 困难 |
Réaliser avec le tel d ossum combiné avec un zodiac une galerie de toit et un coler ben . Merci à toi