Mario Power Star Christmas Tree Topper
Mario Power Star Christmas Tree Topper
3D
Published 2018-08-01T16:07:35+00:00
This is a Super Mario inspired power star Christmas tree topper that I made when the holidays were just around the corner. Thought designing a custom ornament was a bit cooler than going out and buying one so that's what inspired this creation :)
I designed this using Autodesk Fusion 360 and made two distinct versions of the model, one with flat points (the default) and one with rounder points (has the word Round in the file name) if you prefer that.
I've split the star down the middle so you'd need less support material by printing each piece on it's side. And lastly, if your printer can't properly bridge a 3-4 cm gap (which let's face it, many can't) I also included some files with MeshMixer supports added so you don't have to enable support on your printer. They worked really well for me. Just remember, you only need to download the 2 files for the model you choose to print.
Please let me know if you guys have any questions or if there is something that requires fixing :) Enjoy!
0.2 mm layer height 10% infill
| 发表的日期 | 01/08/2018 |
| 让时间去下载 | 1440 - 1500 分钟 |
| 材料数量 | 170grams |
| 尺寸大小 | 234x60x121mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |