Nikon HB-69 18-55mm VRII New lens hood
Nikon HB-69 18-55mm VRII New lens hood
3D
Published 2016-12-28T12:10:22+00:00
This hood is for new Nikon 18-55mm VRII lens with 2 prongs, other designs on internet with same profile have 3 prongs and does not fit on new lenses, it is also reversible for storage like originally designed to be.
Camera in the picture is Nikon D5500
Lens - 18-55mm VRII
Print Settings
Printer:
TEVO Tarantula
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
20%
Notes:
Material - PLA
Print Speed - 60
Nozzle - 210
Heat bed - 60
Pre-Printing - Filament and time saving tip
Start a print let it print a couple of layers and then stop and cancel the print and check the printed ring size with your camera lens, if it is correct re-print a new one, if not then resize it to make it correct, I got it right on first test.
Post-Printing
May have to sand a bit depending upon the accuracy and calibration of printer, I had to sand prongs a bit to thin them on edges. If it is tight fit you can use hair dryer or heat gun to heat it up and then fit it on lens and let it cool to take a required shape.
How I Designed This
Remixed in - Windows 3d Builder
Remixed from design by
Perry Roth-Johnson
| 发表的日期 | 28/12/2016 |
| 让时间去下载 | - 180 分钟 |
| 材料数量 | 21 |
| 尺寸大小 | 83 X 82 X 40 |
| 支持自定义 | YES |
Scaled this to 121.58% (or 101.1mm in the X axis) and this fits my Canon 50mm 1:1.8 lens perfectly. Thank you for an amazing model!