Rathsplicer - monster hunter weapon
Rathsplicer - monster hunter weapon
Published 2017-03-07T11:50:37+00:00
Warning ! not functional ! That's my bad I didn't do a perfect cinematic, so it's not 100% functional but still printable.
Dear community,
I present you the Rathsplither. Quite a competition for me but I wanted a design with two defined positions, like in the game. That's a switch axe, so you can choose between a big slicing balde or a monstruous head axe.
To make the two positions possibles (only one in fact sorry for that), you can slide the blade and the head axe on the support and you can also lock them all with an eye that can be removed.
The model is easy to print, no support required and I worked on the dimensions to make "small" parts, so even with a little printer you can make a big weapon.
Moreover, pins are here to help to maintain the parts together.
As you can see there is a lot of parts but that's a complicated weapon, and at the end you will be glad to have that weapon with you.
On the slider, you have to put the blade on top of the head axe, or you won't be able to lock the positions. The blade can slide and rotate and the head axe will only slide.
Cordially to all.
I took for the printed one I made, a precision of 0.1 mm, but with the normal size you can take a bigger precision without major problem, or take a good precision if you want a nice and soft printed weapon.
发表的日期 | 07/03/2017 |
尺寸大小 | 1120 x 170 x 395 mm |
打印工艺 | FDM |
复杂程度 | 中级 |
支持自定义 | YES |