Recyclops #TinkerCharacters
Recyclops #TinkerCharacters
3D
Published 2019-04-15T09:35:20+00:00
This object was made in Tinkercad. https://www.tinkercad.com/things/7soZ7C3TaCk
Bow down before Recyclops! Protector of Earth from the evil Polluticorn Wizards.
Inspiration taken from Dwight Schrute's Recyclops from an episode of The Office.
You'll need 2 of the following: gauntlet_A, gauntlet_B, gauntlet_C, shin, shoulder, thigh, wheel.
You'll need 4 of arm_joint.
One of everything else.
I printed everything at 0.12mm layer height on an Ender 3 using Inland PLA (Egyptian Blue, Black, Red, White, and Silver). 3 wall, 20% grid infill on everything with exception to the shin, thigh, and arm_joints (100% on those because I had a couple break off on me).
Super glue was used to assemble the eye peices together and affix to the flip plate. Glue was also used to affix the peg in the front to the body and the wheels to each foot. Everything else snaps into place and rotates/articulates for transformation.
| 发表的日期 | 15/04/2019 |
| 打印工艺 | FDM |