roly Polly lamp
$2.39 roly Polly lamp
3D
Published 2018-11-30T15:49:39+00:00
Small tumble lamp to orientate as you want. Inspired by the Memphis movement of the 80s.
Assembly: the top and bottom piece are held together by a screw system with yellow ring. First screw the ring on the top part until the end (there is a stop) then come screw the bottom part.
You can put a weight inside to keep it straight.
I bought a classic 26mm diameter large socket. The 3D is adapted to the various similar models that I could see in stores. If however you want to use a socket of different diameter, I can adapt the 3D for you.
Have fun with the colors, and send me some pictures of your makes!
Print each piece so that the supports are inside, to keep the best surface appearance visible.
The ring does not need supports.
| 发表的日期 | 30/11/2018 |
| Price | $2.39 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |