Rotary iPhone 7 cover
Rotary iPhone 7 cover
3D
Published 2017-09-07T08:47:29+00:00
This design is an entry into the Vectary Design Competition sponsored by MakeX
An iPhone 7 cover designed to look like an old-fashioned rotary phone.
I'm also working on a version in which the numbers spin, so stay on the look-out for it!
This model was created with VECTARY - the free, online 3D modeling tool
Credits:
- model by VECTARY
- model by maureen.nemetski
Print the STL file that contains the entire object (all of the separate parts combined into one). Print the object laying flat with the rotary dial facing upward. Use support and brim to prevent warping. If your printer has a standard 0.4mm nozzle, change the Extrusion Width in your slicer to 0.3mm to be able to print the embossed numbers. If you are using Simplify 3D as your slicer, be sure to use the Mesh/Separate Connected Surfaces function prior to slicing. This will ensure the separate parts will be sliced as one object (yes, it's counter-intuitive, but it works). Use 0.1mm or 0.15mm layer height. Use a moderate support density to make it easier to remove the support. Since the supported area will be hidden when the phone is installed, any decrease in surface quality due to this setting will not be noticeable.
| 发表的日期 | 07/09/2017 |
| 让时间去下载 | 190 - 268 分钟 |
| 材料数量 | 24.5g |
| 尺寸大小 | 68.7mm x 139.9mm x 11.6mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |