Santa Sword
Santa Sword
Published 2016-12-24T20:58:58+00:00
An original project of mine. The thought was: What would Santa's sword look like?
There are 8 parts and each piece is arranged along a 5/16ths inch threaded rod cut to 980mm or around 38.5 inches. This build also requires a couple 5/16th's bolts to fit all the parts together.
The longest piece is 230mm. So a larger printer is required to print the parts as provide, so you may need to cut the parts in half if you are using a smaller printer.
If you are interested in a 3d printed kit I have it and others available here: https://www.etsy.com/listing/487497092/santa-sword-3d-printed-kit
Most of the parts do not require support material. Some sanding may be required on the plugs so that they fit. The plugs are not required but they do help support the blade.
发表的日期 | 24/12/2016 |
让时间去下载 | - 1577 分钟 |
材料数量 | 240g |
尺寸大小 | 84mm x 44mm x 1050mm |
打印工艺 | FDM |
First off, these print files are just freaking amazing. I used the threaded rod and bolt and it locked together nice. This thing makes me feel super powerful lol. It's so sturdy.