PERPLEXANATOR SCI-FI WEAPON
PERPLEXANATOR SCI-FI WEAPON
3D
Published 2017-09-21T09:36:38+00:00
This design is an entry into the Vectary Design Competition sponsored by MakeX
This is a Sci-fi gun design for the VECTARY 3d print design competition. I wanted this to be a simple print which requires no messy support. This piece is made up of 2 components and can be easily printed with the flat face on the build plate of a 3d printer. No support required. Simply mirror this component on your 3d print software to print a left side & right side and then glue both pieces together.
This model was created with VECTARY - the free, online 3D modeling tool
Credits:
- model by Adam Samaeli
- model by Adam Samaeli
Printed this at 150% scale to make it big enough for a small child. Easy print, print a left and right side and glue together. Used .4mm Nozzle, .1618 layer height, 40mm/sec speed, 30% infill, 3 shells, 5 top/bottom layers. No supports.
| 发表的日期 | 21/09/2017 |
| 让时间去下载 | 200 - 372 分钟 |
| 材料数量 | 37.16 |
| 尺寸大小 | 63.20mm x 131.60mm x 11.90mm each half |
| 打印工艺 | FDM |
| 复杂程度 | 非常容易 |
| 支持自定义 | YES |