Skyrim Auriel's Bow
Skyrim Auriel's Bow
3D
Published 2015-02-19T01:01:50+00:00
http://imgur.com/a/gi9Bn - link to the imgur DIY post.
This Bow was modeled in Fusion360 based on an image of Auriel's bow. I did my own interpretation of the bow topology. This is strictly fan art and cannot be sold. This is not an official model.
I tried to chop it up into manageable pieces. I printed mine vertically which was faster (11 parts) but it came out pretty fragile. If I ever attempt to print it again I will print it in 22 parts for strength!
I included a 3 part print for those of you with larger printers.
If you guys need any additional cuts let me know. I also included a complete model of the bow so you can chop it up yourself
for more models and pictures visit my social sites at:
Print at 0.2 mm layer height, with 10% infill. This uses 50 g of filament and takes 4 hours and 75 minutes. These times and filaments are for a scaled object! We scaled this down to 0.15 the original size.
| 发表的日期 | 19/02/2015 |
| 让时间去下载 | 2100 - 2200 分钟 |
| 材料数量 | 540 grams |
| 尺寸大小 | 37 parts |
| 打印工艺 | FDM |
| 复杂程度 | 中级 |
Printed in PETG