Smart Assistant Speaker+Lamp 3D Printed Build
Smart Assistant Speaker+Lamp 3D Printed Build
3D
Published 2017-07-07T15:53:18+00:00
This build was intended to be a combination of a smart speaker (run by Google Assistant) and a smart lamp (Philips Hue light bulb). This is a combination of 3D printed parts (enclosure mostly) and an assembly of various components. You can also load Amazon Alexa instead of Google Assistant if preferred and utilize a LifX bulb instead of Philips Hue as it is cheaper and does not require a hub.
Full build instructions are included in the download files.
https://kit.co/adylinn/smart-assistant-speaker-lamp-diy-build
Base and Back (decent surface quality to limit amount of sanding needed)
Filament choice not really important
0.2mm layer height
15-20% infill
No Support
Brim optional
Shade (decent surface quality to limit amount of sanding needed)
Translucent light filament (eSun Natural HIPS is a good choice)
0.1 or 0.2mm layer height
10% infill
No Support
Brim optional
Light Fixture
Filament choice not really important
0.2mm layer height or higher
10% infill
No Support
Brim optional
| 发表的日期 | 07/07/2017 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |