StarCraft 2 Baneling
StarCraft 2 Baneling
Published 2015-10-06T17:07:40+00:00
I love the world of StarCraft so I had to try and sculpt this Baneling. I recently acquired a 3D printer again so I just had to try and print this one. I always like to go big and maximize my builds. This is because I want to see the details that I made and this won't show up when printing very small objects with a 200 micron printer.
I've split everything in parts that have keys so this should al fit(snap) together. I did it's 'acidic sacks' with Glow in the Dark PLA material to have a cool effect, you can put it on your nightstand next to your bed :P You can view the whole proces of my making at my Behance website. Optionally you can find a turntable render of the Baneling here on Youtube. I do this for fun, not for money. But if you want to encourage me, I do like the tipping though! ;-)
Some tips and what I did:
- depending on what printer you have and what material you print, the teeth/jaws might a bit of sanding down at it's base.
- I printed my version with PLA, works excellent.
- I used a Alabastine plaster spray (grey) for coating and levelling out the ridges and striations a bit. Needs a few layers though and a bit of sanding.
- You can paint directly on the Alabastine plaster spray ;-) No need for priming unless you want use something special I guess
- I printed this on a crappy Cubify 2nd gen at 200 microns.
发表的日期 | 06/10/2015 |
打印工艺 | FDM |
I had seen your model months ago and was hoping to one day get my grubby little hands on the file. Well done! All the pieces printed and fit together beautifully! Lots of post processing here including Bondo, filler primer, and lots of airbrushing.