Loading
Man of Steel Bust
Published 2018-04-23T16:31:20+00:00
Man of Steel Bust
Published 2018-04-23T16:31:20+00:00
Printed on a CR-10S at 0.12mm layer height, 190°C, 60 mm/s, 5% (or maybe 7%...) infill, using a 0.4mm nozzle.
The lower "wedge" part needed some custom supports in Simplify3D.
发表的日期 | 23/04/2018 |
尺寸大小 | W141mm x D84mm x H200mm |
打印工艺 | FDM |
复杂程度 | 容易 |
Thanks for giving it a try! Yeah, the lower wedge seemed like something that might be troublesome. I've never used Cura, only Simplify3D and KISSlicer. I printed mine using Simplify3D, and I used custom placed supports (which I believe Cura doesn't have?) to give it enough surface to print properly. I also added a screenshot of my S3D support settings in case that might be of help.
Love this one! Awesome job, printed out a 390mm tall one on my cr-10s! What paint have you used on yours?
0.12mm layer height 50mm/s I have to cut the wedge to minimize the risk :P
Thank you again for sharing this model with the community, I am happy with the final result. Divided the model into 6 parts to facilitate printing to a size of 480mm in height. It took a week to finish the whole model. Here I share some photos. A next model that I would like to manufacture would be Deadpool's bust, which was fantastic and you thank David for the effort. If you have a model of Venom and you can share it, I and surely many users would be happy to make it for our personal collection. thank you very much!!!
Thank you David! This model is awesome :D Here is my print
Printer: Ender 3 Layer: 0.15 Infill: 7% Material: PETG Supports: YES Scale: 50%
Herr Östmann bekommt immer .1mm LH.
Really nice bust also love the stand design! Thank you! Printed in ABS after a aceton bath to smooth the print painted black and then buffed it with Rub 'n Buff
Sprayed but not completed ...yet...
I can improve my painting skills hahahaha
Flash Forge Inventor 3
Print with resolution of 0.125 with 10% infill at 60mm/s of speed. I had a little rim of over extrusion on the base but it looks so nice that I leave it all. Hope you like the final result. You can follow me on instagram for all the process. Thank you
^_^ 14cm height 0.125 layer height and 10% infill
Print with resolution of 0.125 with 10% infill at 60mm/s of speed. I had a little rim of over extrusion on the base but it looks so nice that I leave it all. Hope you like the final result. You can follow me on instagram for all the process. Thank you
Great model. Enjoyed painting.
Another amazing model to print.
Printed at 200micron with a .4 nozzle and with Extrudr PLA NX-2 blue.
Layer 0.2
390mm one. Thank you for great model ! :)
Did you ever make this easier to print mate, with the point supports, is the only model of yours I haven’t been able to complete... as you know my collection from twitter..
Clean model thank you for sharing
Merci pour le partage , magnifique. Façon bronze. Impression en PLA ,application jus ABS en 3 couches , peinture primer 3 couches et poncage .
Another fantastic bust. And what a joy to paint it is! Thanks again David Ostman, will be donating as soon as I can!
Thank you so much for the model! I hope you will some day make Clark Kent ;) This was was printed in 0.12 , 7% infill in 50mm/s. Custom support with the pluging in Cura now it's time for sanding and painting!
Printed at 0.12 At 200, Bed 60 and speed 55..
Great model of the man of steel - in copper PLA :-) Had trouble with supports for "V" in Slic3r - they seemed to not hold the forming V and it was lost. Great outcome anyway. 100% size in 3DFillies Copper PLA, and then painted and wiped back with kids acrylic black
Great model! Thanks for sharing
Printed in Prusa i3 Clone
That is a great model. Congrats
Awesome!
Used a silver craft polish for the finish
What a great print. I did this one for a friend and it turned out really good. Thanks for all the hard work you do to make these.
Muy buen stl
Thank you!
This is my version
thank you.. very nice statue.. i really enjoyed painting it
Thanks for the great model
Magnífico muito bom o modelo, pintado com tinta acrílica
Man of Steel Superman, Thanks for the great model I even done a timelapse for this one http://youtu.be/iKw1IINLH3s
Super model !
Thanks!
Came out great
Impression en résine de 14cm,sous couche blanche, léger ponçage,bombe spray silver bas de gamme. Merci Eastman pour tes modèles 3d magnifiquement stylisés.
.
Printed the man of steel using ideamaker slicer at 50mm/s. I probably should have gone a bit slower because he came out kind of rough, but after some cleanup, prime, sanding, and paint, he looks pretty good.
Imprimé avec des supports personnalisés, le rendu est top, merci ! Plus qu'à passer un coup de résine et à peindre dès que j'aurais le matériel.
Thank you David this is my print.... Printed on Anet A6 not A8 the system here does not show the A6 as option but presume they the same thing... I scaled it down to a 100mm print and it took about 2 and half hours.. Thank you for the share