"Surprised Patrick" spongebob meme character (Little-Meme)
"Surprised Patrick" spongebob meme character (Little-Meme)
3D
Published 2015-04-07T21:13:39+00:00
This is a little character ( Patrick in Spongebob Squarepants) inspired by internet memes, I call them "Little-Memes".
(See: knowyourmeme.com/memes/surprised-patrick)
I started selling these little guys on Etsy, but it was too much for one man, so I'm uploading them to My Mini Factory :D
Please experiment with settings for your printer, but these are what worked for me:
(Tested with PLA)
Layer Height of "0.12mm" at default scale, to preserve detail.
If your printer has 1 extruder fan, then rotate the character so the fan is blowing on the "back of its head".
Print at a "low" temperature (around 205C).
Minimal Layer Time "13 seconds" (at a fill density of 25%, and print speed of 50mm/s).
Print at 0.2 mm layer height, with 10% infill. This uses 12 g of filament and takes 2 hours and 17 minutes.
| 发表的日期 | 07/04/2015 |
| 让时间去下载 | 137 - 147 分钟 |
| 材料数量 | 12 g |
| 尺寸大小 | 36 x 43 x 62 mm |
| 复杂程度 | 非常容易 |
| 支持自定义 | YES |
0.15 Layer 10% infill Looks great !