Tazmanian Devil - Full
Tazmanian Devil - Full
Published 2021-11-02T20:11:55+00:00
Tazmanian Devil, commonly referred to as Taz is from Warner Bros.' Looney Tunes and Merrie Melodies cartoons.
This model is the full body version of my original Tazmanian Devil model:
https://www.myminifactory.com/object/3d-print-tazmanian-devil-191859
To make Taz with his full body, all the files and writeup notes from the original should be followed with the following exceptions:
1 - body_full_top replaces body
2 - body_full_bottom replaces whirlwind
3 - face_full replaces face
4 - base_full replaces base
5 - Extra part body_full_pin
6 - body_full is an optional part if you want to print the full body as one piece. This part is quite large and would require quite a bit of support.
Special note:
The body_full_bottom part requires slicer supports between the legs only (no supports are needed under the tail). The rest of the model does not require supports.
The assembled model is 230mm tall.
**Special shoutout/appreciation to maker Benoît Lussier for helping me with this model. He did all the test printing, a full build and provided pictures of the completed model.**
Enjoy!
发表的日期 | 02/11/2021 |
Once again Steve hits one out of the park! Very well sculpted and cutup. Very easy to print. Printed @ .16mm for the most part. Some .08 on smaller and .2 on and base. Ears - RC Hobby King Pink Tongue - GST3D Pink PLA Black Edition (Wife color selection) Face WYZworks Wood Mouth - Filacube Maroon Dark Brown - GST3D Brown Black - Polymaker Charcoal Black PLA White - WYZworks White Green - Hatchbox Green