The Shwarmajet: nerf rival PVC adapter trigger [version3] (no support)
The Shwarmajet: nerf rival PVC adapter trigger [version3] (no support)
Published 2019-04-12T18:27:07+00:00
an attachment to make a cheap, nerf rival round accepting blaster, that uses air power to shoot lots of balls with great innacuracy!
requires
1) 3 1" PVC couplers
2) 1 1" PVC pipe (at least 1' long, but not more than 2' 1/2)
3) 1 1" PVC pipe (3" length)
4) a milk/detergent bottle (some type of bottle made out of HDPE. [i like to recycle])
5) the cap of the above bottle
6) a small spring (a pen spring or small printer spring will do. i got mine from the trash)
7) a cordless leaf blower (or any cordless blower/fan)
- sand trigger part to fit into main adapter loosly
- drill/cut a hole, the size of the rival rounds in the milk bottle cap. make sure to deburr it
- glue the cap of the bottle to the 3" length of PVC, creating a 'hopper' adapter
- attach one coupler to top hole of main adapter
- attach milk bottle 'hopper' adapter to coupler
- glue/melt a PVC coupler onto the leaf blowers funnel (or make a funnel from another milk bottle)
- put trigger into main body
- glue/melt the smallest piece to the main adapter body
- lock main adapter body onto smaller adapter hole
- attach last coupler to smaller adapter hole
- connect spring from loop on smaller adapter hole to trigger
- glue/melt grip onto main adapter, making sure you can still pull the trigger back enough
- attach leaf blower to back hole of main adapter
- have fun spraying balls......expect to miss
This object was made in Tinkercad. https://www.tinkercad.com/things/1qflwhjrMkU
use rafts, but DO NOT use support rods
infill should be %85+ (ideally %100)
requires sanding
发表的日期 | 12/04/2019 |
让时间去下载 | 8 - 分钟 |
Scalable model printed with standard settings. Dimensions, time to print and material quantity refer to the objects I made.