Towel Rack 3D Print (Mimic Industrial Pipe)
Towel Rack 3D Print (Mimic Industrial Pipe)
3D
Published 2019-07-15T12:57:55+00:00
Description:
- Distance is roughly 350 mm on center (center of screw holes)
- roughly 13 3/4"
- Adding another 2" pipe and coupler will extend rack
- roughly 16"
- Surprisingly Sturdy
- Designed to fit print bed (110mm X 110mm X 110mm)
- Minimal support needed
- Meant to mimic Industrial Pipe (Black Iron Pipe)
- Custom 45° angle Threads to reduce needed support
Instructions:
2 (Waste Nut)
2 (2" Pipe)
2 (90° Elbows)
2 (6" Pipe) and
1 (Coupler)
- First Spray paint with textured paint to hide layer lines
- Second paint with a metallic paint of your choice
Hardware Not included.
*Note:
- Picture showing how to position both 6" pipes
- The 90's only need scafolding from build plate.
-
If you have any questions PM me and I'll try to answer as soon as posible,
Thanks.
| 发表的日期 | 15/07/2019 |