Tram - Melbourne Tram
Featured
7,495
views
436
downloads
2
collections
3 comments
Loading comments...
Tram - Melbourne Tram
3D
Published 2018-01-02T17:55:35+00:00
35
3
Add to Collection
Description
I wanted to use these motorised bogie from the Open-Railway project and make a Melbourne Tram.
Motorized bogie for OS-Railway - fully 3D-printable railway system
https://www.thingiverse.com/thing:2644082
Starting before the hot rod, I have learnt lots in doing the AEC double decker bus, this in essence is easier, alignment of sections is often the hardest part. The parts have all been split up to the different sections.
Edited:
• whole body of the tram
• new roof - number on correct side, added numbers
• trim for undertake tram - print two parts left and right
To do:
• transformer on the top of the tram
Printing Details
Layer Thickness 200 microns. InFill 20%.
Technical Information
发表的日期 | 02/01/2018 |
让时间去下载 | 680 - 740 分钟 |
材料数量 | 128 grams |
尺寸大小 | 240mm x 50mm x 55mm |
打印工艺 | FDM |
复杂程度 | 中级 |
More Information
Object Parts