WiiU/Tablet Support for TotalGymPro
WiiU/Tablet Support for TotalGymPro
Published 2017-02-10T11:34:46+00:00
Tablet Support for TotalGymPro, enjoy!
Version 3 = I tweaked this in SOLIDWORKS to eliminate support material and reduce model material used. You should be able to print this with very little infill or very low density. I uploaded the STL and a screenshot from SW.
Version 2 = I re-did this in SOLIDWORKS. This version uses support material just to reduce the model material used. I uploaded the STL (and tried to upload the zipped SW part file in case you want to alter this).
Version 1 = This was something I did really quick and it's not totally symmetrical. Feel free to ignore this. Extremely functional, but not pretty. Ha!
Version 1 = Printed fast at 70 mm/s due to the easy geometry, layer height 0.3mm, infill 20%.
发表的日期 | 10/02/2017 |
打印工艺 | FDM |
复杂程度 | 中级 |
支持自定义 | YES |