"Travelers in Hyrule often carry these small figures for protection and strength when traveling. They resemble the various statues of the Goddess Hylia found around Hyrule." 3" tall. Printed on a Makerbot Replicator 2. Sanded and given a coat of XTC smoother. Sanded again and sprayed with Rustoleum Hammered Pewter effect spray paint.

Printed a decent size of this amazing statue on my Prusa i3. Took a little over 17 hours due to the size; which was around 130mm wide x 100mm long x by 165mm Tall..ish) Not exact measurements, but definitely most of the bed lol. My Settings: .2mm Layer Height 10% Infill 5 Top Shells/5 Side Shells/ 3 Bottom Shells

Solutech Marble PLA @ 0.1 layer height

I love this shape. Thanks

Printed 2 sizes and both look great but at 0.2mm they need a light sanding in some places.

Printed in ASA, primed, and spray painted with stone texture paint. Brushed with some watered acrylic paints for depth/color and then sealed with a spray semi-gloss sealant.

Printed in ASA, primed, and spray painted with stone texture paint. Brushed with some watered acrylic paints for depth/color and then sealed with a spray semi-gloss sealant.