22" PennyBoard Hanging Mount
4,644
views
172
downloads
1
collection
0 comments
Loading comments...
22" PennyBoard Hanging Mount
3D
Published 2017-01-05T12:17:32+00:00
20
0
Add to Collection
Description
I couldn't find a good spot to store my board, so I decided to design and print some mounts I could attach to the side of my wardrobe and hang my board from. You can either use 2 or 4 to hang the board.
The horizontal distance between the mounts needs to be 65mm and if you are using 4 mounts the vertical distance is 365mm.
I printed this in white PrimaValue PLA on my Wanhao Duplicator i3 at a 0.2mm layer height with 25% infill which is more than strong enough to hold the weight.
Printing Details
ok
Technical Information
Date published | 05/01/2017 |
Benoetigte Zeit | 75 - 150 Minuten |
Menge an Filament | 13 |
Dimensionen | 50×45×65 |
Technologie | FDM |
Support Free | YES |
More Information
Object Parts