TribesStoreIdeenFORUMNEWCanvasThe AdventureNEWPhysical

3D Printed Wearable Cosplay Wing Set!

3D File Logo  3D

Published 2019-07-17T12:27:53+00:00

    3D Printed Wearable Cosplay Wing Set! image
    3D Printed Wearable Cosplay Wing Set! image
    3D Printed Wearable Cosplay Wing Set! image
Loader
360°
  1. Geräte & Elektronik |
  2. Requisiten & Verkleidungen |
  3. Store |
  4. Bildung>
  5. University>
  6. Engineering Science>
  7. Mechanical engineering
Featured
62,282 views
52 collections
Community Prints Add your picture
Loader
  • Picture of print of 3D Printed Wearable Cosplay Wing Set!
  • Picture of print of 3D Printed Wearable Cosplay Wing Set!
  • Picture of print of 3D Printed Wearable Cosplay Wing Set!
29 comments
    Loading comments...

    $12.00 3D Printed Wearable Cosplay Wing Set!

    3D File Logo  3D

    Published 2019-07-17T12:27:53+00:00

    Enza3D

    @Enza3D

    11 objects

    178 Followers
    Add Files To Cart $12.00
    +VAT/Sales Tax (if applicable)
    92% goes to the Creator
    (excluding payment processing fees)
    749 29 Add to Collection
    Description

    This is a wearable and functional wing kit for all your cosplay and con needs! We designed and built this kit for a personal cosplay project but were so happy with the results, we had to make it available to the world. When fully extended, the wings are over 8.5 ft (2.6 m), and collapse to just over 1.6 ft (0.5 m). These things are HUGE! You can see the motion here on our Instagram Post: https://www.instagram.com/p/B0JKb-PnGgZ/

    This was designed in Fusion 360, and was made to work with readily available and accesible components. It doesn't require pneumatics or a massive motor, and should be able to support decent weight thanks to the aluminum framing and spring assistance. A full BOM is included in the assembly instructions, found here, http://bit.ly/30JoxgG

    We sell a kit on our Etsy Page that contains all the purchased hardware which can be found here https://etsy.me/2OezTIe

    We hope this design will act as a "skeleton" for YOUR cosplay creation. PLEASE post pictures and videos of what you make! We cannot wait to see it! 

    Show more Zeige weniger
    Lizenz
    Printing Details

    When printing the joints, please keep in mind these are structural parts! Meaning they should be printed with at least 4-5 walls, and 100% infill. If they are printed with less plastic, the risk of them breaking during use increases. 

    Technical Information
    Date published 17/07/2019
    Price $12.00
    More Information
    Object Parts
    Bottom Linear Guide.stl 130 KB
    Cover.stl 659 KB
    Double Yoke.stl (Repaired) 100 KB
    Pulley.stl 160 KB
    Shuttle.stl 1 MB
    Tang.stl 313 KB
    Top Rod Guide.stl 925 KB
    Yoke.stl 1 MB
    Tags
    mechanical skeleton wearable wings cosplay steampunk Angel Fusion360 WingKit
    Interesting objects for you
    Show more