Articulated Teddy Bear
Articulated Teddy Bear
Published 2015-04-24T16:37:38+00:00
This small (teddy) bear is the next addition to my zoo. Pre assembled and the support is included in the file so it should be really easy to print in between one and two hours.
If you do print it, like always, I would like to see the results :o)
Print at 0.2 mm layer height, with 10% infill. This uses 11 g of filament and takes 3 hours and 11 minutes. I only print in PLA so I don't know the settings for other materials. My settings are 0.15 mm layer height, 0.5 mm for the shell and 0.65 mm for the bottom and top and a Infill of 25%. If you want a really smooth toy, just lower the layer height. All the parts are hollow to create double walls for extra strength.
Date published | 24/04/2015 |
Benoetigte Zeit | 191 - 201 Minuten |
Menge an Filament | 11 g |
Dimensionen | 28 mm x 30 mm x 46 mm |
Schwierigkeitsgrad | Easy |