Bike Chain Cleaner - Toothbrush version
Bike Chain Cleaner - Toothbrush version
Published 2019-08-28T01:45:13+00:00
We really liked the bicycle chain cleaner design by gamingoodz on Thingiverse. But we wanted to use some old toothbrushes to clean the bicycle chain, so we modeled this. It should fit most normal toothbrush models around and uses two M3 screws to keep the cover in place.
The things you need are:
- 2 x M3 screws (we made the holes 16 mm deep, but even M3x8 should work just fine.
- 3 toothbrushes, or brass brushes. Ideally, the three of them have the same size.
Prints without supports.
UPDATES
-2022 - 01 - 15: Thanks to Thingiverse user @draws_with_kitties we realized that this actually looks like a creature eating up the bike chain. So we decided to add some fun to it :)
We also made a parametric version of this, so you can modify it to fit the brush heads you are going to use! You just need to adjust some parameters on Fusion 360, and the dimensions will adjust automatically.
Please let us know if you print this! we would love to see your prints in action. And if you have any suggestions, let us know in the comments or with a message ;)
Where to get some brass brushes to use with this?
You can get some from Amazon (affiliate link)
FOLLOW US ON INSTAGRAM!
@TwoThingies
Nozzle size: 0.4 mm
Line width: 0.42 mm
Layer height: 0.2 mm
Print Speed: 60 mm/s
Perimeters: at least 3 (we used 5)
Infill: 10%
The M3 threads are modeled so you won't need much effort to put the screws in place.
Date published | 28/08/2019 |
Benoetigte Zeit | 90 - 120 Minuten |
Dimensionen | 40mmx40mmx45mm |
Technologie | FDM |
Support Free | YES |