Creality Ender 2 X-Axis endstop mount
10,634
views
493
downloads
3
collections
0 comments
Loading comments... 
Creality Ender 2 X-Axis endstop mount
3D
Published 2017-08-16T14:47:36+00:00
52
0
Add to Collection
Description
The original X-Axis endstop mount limits space for any extensions of the printhead in X direction. With this little mount i moved the switch under the belt.
mountable with the original screws.
Printing Details
- Print w/o support as shown in the picture from cura, only the holes for the screws to the stepper need a little cleanup.
- When satisfied with the print, unpower disconnect the printer.
- Unscrew the original endstop holder. The X-Stepper should stay in play safely, because of the four hex distance bolts.
- Replace the two upper hex distance bolts with two of the screws from step 3. Tighten carefully.
- unscrew the lower two hex distance bolts.
- unscrew the endstop switch from the original endstop holder.
- put the screws from step 6 into the slotholes of the new holder plate and the remaining two screws from step 3 in the outer holes (picture)
- mount the new holder under the stepper pulley. Tighten carefully.
- put the little distance block (part two) on the long screws, the limit switch should fit in the gap losely.
- put the nuts from step 6 on, adjust the now mounted switch and tighten the nuts carefully.
Tadaa!
Technical Information
| Date published | 16/08/2017 |
| Benoetigte Zeit | 15 - 30 Minuten |
| Dimensionen | 41mm x 25mm x 12mm |
| Technologie | FDM |
| Schwierigkeitsgrad | Medium |
| Support Free | YES |
More Information
Object Parts