DishSoap despensing peristaltic pump
DishSoap despensing peristaltic pump
3D
Published 2015-11-23T13:29:30+00:00
I have designed a peristaltic pump to dispense dishsoap in small quantities (will be arduino controlled eventually) project was designed and modeled in Autodesk 123D Design and will use the platter revolving geared motor from a microwave, and can be mostly 3d printed (can 3d print the wheels or use 685ZZ bearings). Have not finished printing yet, will add pictures upon completion
Print at 0.15 mm layer with 40% infill. Now you must adapt your motor and hose. Maybe the holes in the mid part or in the base must be enlarged. For silicone hose (taken from an old inkjet printer - 2mm flat) you must print wheels (for me 9 mm diameter was OK). The 685ZZ bearing will fit on smaller hoses (1mm flat) . I tested the pump with milk - works fine. If the motor axis has a threaded hole you can fasten the rotor with a screw and the pump can be operated without cover.
| Date published | 23/11/2015 |
| Benoetigte Zeit | 200 - 400 Minuten |
| Menge an Filament | 45 g |
| Dimensionen | 55x60x18mm |
| Technologie | FDM |
| Support Free | YES |