Duet 3 6HC & Raspberry Pi Test Rig
Duet 3 6HC & Raspberry Pi Test Rig
Published 2020-05-06T12:05:06+00:00
Here is a simple mounting rig for the Duet 3 Mainboard 6HC and a Raspberry Pi 3B or 4B SBC for testing printer builds or to assist with RRF3 firmware / application development.
The fan mount will fit any 40x40x10mm blower fan. Most fans should be a friction fit, but if yours is loose, then insert a zip tie through the hole below the fan to affix it to the test rig.
A fan is optional, but recommended in addition to fitting heat sinks to the stepper drivers for proper cooling.
STL and STEP files are included in the download for easy remixing.
Use any filament, PLA is great.
Rough / fast print settings are acceptable, although for optimal fit a 0.4mm nozzle is recommended.
Date published | 06/05/2020 |
Dimensionen | 270x280x50mm |
Support Free | YES |