FPV-Rover V2.0
FPV-Rover V2.0
3D
Published 2019-03-17T12:15:29+00:00
It's finally here. Version 2.0 of the FPV-Rover.
This is the second version of the FPV-Rover.
https://www.thingiverse.com/thing:1240754
This one is with 540 motor. This was requested a lot on the other version and I redesigned the whole rover (although it looks the same) for this change.
Intructions and BOM can be found on Instructables
https://www.instructables.com/id/FPV-Rover-V20
All upgrades from V1 can be used for V2.0 as well.
Upgrade 01 (rubber gun):
http://www.thingiverse.com/thing:1269962
Upgrade 02 (trailer):
http://www.thingiverse.com/thing:1700138
Upgrade 03 (GoPro mount):
http://www.thingiverse.com/thing:1936491
Upgrade 04 by Superfly851 (grabatron):
http://www.thingiverse.com/thing:1979227
Videos on Youtube:
https://youtu.be/dpUSdjNppN0
https://www.youtube.com/watch?v=lbQW_ebiLKA
https://youtu.be/6aBkTEbLCWM (camera tilt)
https://youtu.be/Bfb7bcftKTg (testrun on balcony)
Last Update 30.09.2020
Two additional parts (inner frame left high and inner frame right high) uploaded to the files.
Last Update 27.03.2020
This is the next major update of the FPV-Rover.
A lot of parts have been redesigned to save material and print time. And to reduce support on the parts needed.
Some changes:
- less material in main body
- camera cutout in main body smaller
- enforeced ventilation holes in the inner frames
- cutout in the inner frame to have more space
- less material in outer frame
- ability do screw external modifications to the outer frame (new projects)
- added a bevel gear with a ratio of 4:1 additional to 2:1. This reduces motor overheating and increases torque
- new ESC mount
Resolution: 0,2mm
Infill: 20%-60%
Support: Some parts need support
| Date published | 17/03/2019 |
| Dimensionen | 230mm x 235mm x 80mm |